RetroMacCast

Where great old Macs live again!

I have a Classic II that has an issue recognizing the SCSI hard drive, but booted fine from a floppy. I have been doing some research to isolate the issue. This website has a tip on what chip to replace, but that is for an SE/30. The chip described by that guide is not on the Classic II (as far as I can tell). I decided to clean the dust off the board, but now the Classic II won't even boot with the floppy. Instead I get columns of black & white bars about an inch in length.

I have included a photo of what the Classic II boots to. What can I do to bring this Classic II back to life?

Thanks,
Ken

Views: 68

Attachments:

Reply to This

Replies to This Discussion

My Classic 2 having the same thing going on with it
i don't know how to fix it
Darn...

From my research it seems to be a fairly common problem. I really like this machine and want to get it back up and running.

RSS

Badge

Loading…

© 2021   Created by James.   Powered by

Badges  |  Report an Issue  |  Terms of Service